The innovative Abyzz A200 pump with its titanium impeller consists of powerful and programmable menu-controlled electronic driver and a sinusoidal three-phase synchronous motor (pump). The motor operates at an efficiency factor of over 90% which, along with the fact that you can adjust the speed to meet your performance requirements, makes it an energy-saving solution to traditional power hungry higher voltage pumps. The menu controlled driver and motor run on an mere 12V and because of that it can be used in a myriad of applications. The integrated flushing bearing provides optimum protection against calcification (Calcium Carbonate deposits – CaCO3). In conjunction with the silicon carbide bearings and special hard metal shaft, this feature provides for low-maintenance operations. The materials used to manufacture all of these components have been carefully selected so as to be harmoniously integrated into the overall design to look great, ensure a long operational lifetime, and meet the most demanding requirements and highest quality standards. This product was developed and is manufactured in Germany by Venotec. Features Variable speed range (0 – 100%)MCFS® (Menu Controlled Flow Sequencer) for random, wave etc.BOOSTMODE® integratedComprehensive safety functions (e.g. dry run, temperature sensor, and overload protection)Soft startupBus-enabled interface for peripheral devicesLockable plug contactsLow-noise operationOperating Voltage: 12V BOOSTMODE® max flow rate: 4,400 gph / 17,000 lphNormal mode max flow rate: 3,750 gph / 14,000 lphDischarge Flow Speed: max 5.4 m/s, nominal 4.6 m/sDelivery height: max 28.6 ft / 8.8mRated input: 4W-200WInput voltage: 110V~ @ 60HzOperating Voltage: 12VAmbient temperature range for operation: 35.5°F – 104°F / +2°C – 40°CMaximum operating pressure: 21.75 psi / 1,5 barMaximum immersion depth: 6.5 ft / 2mPump cable length: 32.5 ft / 10mInlet/outlet connections: 50mm/40 mm (suitable for PVC/AVB adhesive fittings) In The Box:Abyzz A200 pump and 110V 60Hz driverPower cable: 5 ft / 1.5mDriver/Controller connecting cable: 6.5 ft / 2 metersOperating manual
